HELIX-D-ONE

Amplificador de subwoofer de 1 canal con crossover activo integrado y estabilidad de 1 ohmio

Pvpr - Con Iva:239,00 €

HELIX-D-ONE

Descripción del producto

Features

  • Small footprint Class D amplifier with high output power of 600 Watts RMS @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel
  • Start-Stop capability down to 6V supply voltage
  • Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function
  • Integrated, active crossover with lowpass, bass boost, subsonic and phase control
  • Extremely stable output stage with high-current power transistors and 1 Ohm stability
  • Bass remote control for volume adjustment
  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Special features:

Smart highlevel input

The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M ONE.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Start-Stop capability

The switched power supply of the HELIX M ONE assures operation even if the battery’s voltage drops down to 6 Volts during engine crank.

Technical data

Power RMS  ≤ 1% THD+N

Normal operation
(One amplifier)

TwinPower Link
(Two amplifiers)

- @ 4 Ohms

1 x 200 Watts 

1 x 645 Watts

- @ 2 Ohms

1 x 340 Watts

1 x 910 Watts

- @ 1 Ohm

1 x 530 Watts

- bridged @ 4 Ohms

-

- bridged @ 2 Ohms

-

Max. output power per channel*:

Up to 660 Watts RMS @ 1 Ohm

Amplifier technology

Class D

Inputs

2 x RCA / Cinch
2 x Highlevel speaker input
1 x Remote In
1 x Remote control input

Input sensitivity

RCA / Cinch 0.5 - 6 Volts
Highlevel 1 - 14 Volts

Input impedance RCA / Cinch

30 kOhms

Input impedance highlevel

12 Ohms

Outputs

1 x Speaker output

Output voltage RCA / Cinch

Signal converter for digital input

Frequency response

10 Hz - 250 Hz

Bass boost

0 - 12 dB / 45 Hz

Highpass

Lowpass

50 Hz - 250 Hz adjustable

Bandpass

10 Hz - 250 Hz adjustable

Subsonic

10 Hz - 50 Hz adjustable

Phase

0 - 180° adjustable

Slope high- / lowpass

Slope subsonic / lowpass

12 dB/Oct.

Signal-to-noise ratio digital input

Signal-to-noise ratio analog input

95 dB (A-weighted)

Distortion (THD)

0.25 %

Damping factor

100

Operating voltage

9.6 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current

1000 mA

Operating temperature range

-40° C to +70° C

Fuse

2 x 30 A Maxi-fuse (APX)

Power rating

DC 12 V ⎓ 60 A max.

Additional features

Active, adjustable crossover, bass boost, phase shift, TwinPower Link, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control

Dimensions (H x W x D)

53 x 250 x 230 mm /
2.09 x 9.84 x 9.06”

* In typical applications as subwoofer amplifier

Scope of delivery

1 x Amplifier HELIX D ONE
1 x Cable remote control
1 x Mounting material
1 x Instruction manual

ENLACE

https://www.audiotec-fischer.de/en/helix/amplifiers/d-one

 HA11108

 
HELIX-D-ONE

Imágenes de producto

HELIX-D-ONE

Vehiculos compatibles

Marca Modelo Carroceria Desde Año Hasta Año
HELIX-D-ONE

Descargas


Notice: Undefined variable: arpro in /var/www/vhosts/iriherautomotivegroup.com/httpdocs/producto.php on line 380

Warning: Invalid argument supplied for foreach() in /var/www/vhosts/iriherautomotivegroup.com/httpdocs/producto.php on line 380
Descripción del archivo Tipo de contenido Nombre del archivo
HELIX-D-ONE

Accesorios relacionados

HELIX-D-ONE

Características

Características técnicas Detalles